Mill glaze is a condition that occurs on wood during the milling process. The heat applied during the process causes the natural oil within to ooze out when the blades of the plane close the wood pores. The oil produces the glaze that prevents penetration of water or oil coatings or adhesion of film forming…
In the event that you find you need to paint over a surface that has been exposed to a high amount of humidity (such as in a bathroom or from various outdoor elements), the following steps are designed to help you along the way! Preparing the Surface Prior to beginning the process, the entire surface that…
A task such as painting over older wallpaper is one that can be rather time-consuming; however, it can also be cost-effective at the same time. Before beginning the actual process, it’s important that you first invest in a wallpaper cover-up paint, as this will work better than a basic interior wall paint. Once you do…
When you are looking to paint over outdoor graffiti you will need to choose a product that both primes and seals the wall that you need to paint over. This will ensure that any stains from underneath the paint do not start to resurface in the future. Before the surface is painted, you will need…
If you or someone you know is currently looking for a way to cover up nicotine stains on walls, here are some useful steps that you should make note of! Preparing the Surface Ensure that any surface that you plan to work with is completely clean, dry, and free of any and all substances that…
This guide explains how to paint over mould and mildew stains and prevent them from returning, while achieving a decorative finish. Surface Preparation Make sure all surfaces are clean, dry and free of anything that may prevent adhesion. Remove any loose or unstable material by scraping or brushing with a stiff brush until the edge…
The first step you should take when stripping a deck is to do a spot test. Which means you can apply the stripper to a small area to see how long it takes for the coating to actually lift off the surface. This will save time in the long run since you will know how…
To decide what type of wood stripper you need you first need to know what type of coating you will be removing. This is important to know since different strippers are made to take off different types of coating. There are seven main coatings that you could be looking to remove. They are all listed…
When a person is learning about wood stripping, Owatrol is one of the best places to start. Ultimately, the product needed for the job will depend on the wood and the specific stripping job that is being done. With that said, we have taken the time to look at the different Owatrol Wood Strippers below….
If you have decking that is a lot newer, then chances are the wood itself will have mill glaze. This means that any and all finishes will be prevented from being adhered to the surface correctly and you should prepare the pores of the timber itself before attempting to apply any kind of a finish….
